Discover Scale Model Railroading at
STRUCTURE BUILDING - The Foamcore/Veneer method
An OnLine Clinic presented by HORAILROAD.COM
When we first cut out the pieces of foam core, we cut a base AND A ROOF. Now that the lights are done, its time to glue on the roof. A dab of hot glue works here too.
 

This photo was taken during a test fit after the walls were glued together.  In the sequence of the clinic, the roof is put on after interior lighting work.  If you skip lighting you could put on the roof on sooner.

cl2_041_roof.jpg (63105 bytes)

   

The OnLine Clinic copyright 2001 by Ken Spranza and horailroad.com