Discover Scale Model Railroading at
STRUCTURE BUILDING - The Foamcore/Veneer method
An OnLine Clinic presented by HORAILROAD.COM
On a larger structure I leave the foam core walls the full thickness and put on a CAP of styrene strips. Because this building is small, I shaved down the wall thickness using the hobby knife.
This allows a narrow cap on top of the walls.

Strips of paper cut for each wall make a curved transition from the top of wall to the surface of the roof.  These strips are plain typing paper.

cl2_042_roof_smooth.jpg (61741 bytes)

   

The OnLine Clinic copyright 2001 by Ken Spranza and horailroad.com