|
STRUCTURE BUILDING - The Foamcore/Veneer
method
An
OnLine Clinic presented by HORAILROAD.COM
|
| The oddly shaped piece in the center
is the base, made to fit the building lot. It was cut to fit
using the hobby knife from another piece of foam core, not the
strips.
|
The four wall sections are cut from the strips. Use the base to determine the
length of each wall. The corners can be cut to approximate the correct angles
by leaning the hobby knife when cutting. An exact angle is not necessary.
You will need to make a copy of the base to use as a roof. This can be done
by simply laying the base on foam core and tracing the outline.
|
|
|
|
|
|
|
|
| The OnLine Clinic copyright
2001 by Ken Spranza and horailroad.com |
|
|
